www.sunled.com published date : feb 23,2008 drawing no :sdsa6196 v1 checked : b.l.li u p.1/4 part number: ZM2BG53W-1 1.6x0.8mm smd chip led lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3.specifications are subject to change without notice. features z 1.6mmx0.8mm smt led, 0.75mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z package: 2000pcs / reel . z moisture sensitivity level : level 3. z rohs compliant. preliminary spec part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. ZM2BG53W-1 green ingan water clear 380 795 525 120 m2bg (ingan) unit forward voltage (typ.) (i f =20ma) v f 3.2 v forward voltage (max.) (i f =20ma) v f 3.7 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 525 nm wavelength of dominant emission (typ.) (i f =20ma) d 535 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 39 nm capacitance (typ.) (v f =0v, f=1mhz) c 65 pf operating characteristics (t a =25c ) absolute maximum ratings (t a =25c ) m2bg (ingan) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 100 ma power dissipation p t 111 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 electrostatic discharge threshold (hbm) 1000 v attention observe precautions for handling electrostatic discharge sensitive devices
www.sunled.com published date : feb 23,2008 drawing no :sdsa6196 v1 checked : b.l.li u p.2/4 part number: ZM2BG53W-1 1.6x0.8mm smd chip led lamp ? m2bg
www.sunled.com published date : feb 23,2008 drawing no :sdsa6196 v1 checked : b.l.li u p.3/4 part number: ZM2BG53W-1 1.6x0.8mm smd chip led lamp ? recommended soldering pattern (units : mm;tolerance: 0.1) ? tape specification (units : mm) ? the device has a single mounting surface. the device must be mounted according to the specifications . remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com published date : feb 23,2008 drawing no :sdsa6196 v1 checked : b.l.li u p.4/4 part number: ZM2BG53W-1 1.6x0.8mm smd chip led lamp packing & label specifications ZM2BG53W-1
|
